My Account | Hi Guest, Login?
(0) Item
Home > SUPPLIES & EQUIPMENT > SODA SIPHONS & SELTZER BOTTLES > HOW DOES IT WORK? > Liss 2-Liter Soda Siphon Directions

Liss 2-Liter Soda Siphon Directions

Please follow these procedures for the use of your new LISS 2 Liter Soda Siphon.
  • Before use wash with warm soapy water and rinse thoroughly
  • Insert the fill tube (clear plastic tube approx. 1 ½” x 3”)
  • Fill to the top with drinking water
    • o If you get water or gas spraying out the nozzle, only fill to the bottom of the fill tube rather than the top.
  • Do not add any syrups or flavoring to the siphon
  • Insert siphon tube with top gasket
  • Tighten the black plastic head
    • o If you get any water leaking between the head and the bottle, the head is usually not on tight enough.
      • o If you loose pressure after your siphon sits in the refrigerator overnight, usually the head is not on tight enough resulting in a slow leak.
  • Insert CO2 cartridge into the charger holder and tighten quickly until the charger holder is tight.
    • o Do not stop turning the charger holder when you hear the gas. Keep turning until the charger holder is tight. This seats the charger in the head and ensures all the gas gets in the bottle.
IMPORTANT – FOR THE 2-QUART SIPHON, wait approximately 3 minutes before inserting the second charger.
  • Shake bottle several times and you are now ready to dispense your sparkling soda water.
  • You should also shake the bottle before dispensing after it has been sitting.
  • For best results keep refrigerated between uses.