2925 Charger Holder - DISCONTINUED

This charger holder fit my retro mesh-covered selter bottle perfectly. I don't know how the original charger holder got lost, but now... once again... I can use my seltzer bottle. It's so hip... so "Rat Pack" !!!

The 2925 Isi charger holder fit my vintage mesh covered soda siphon perfectly!! I took a chance because the siphon was in beautiful condition and without the holder it was useless. I am so glad that I did.

The 2925 is an excellent fit on my old Kovocas. It's plastic but quite stout and VERY rigid. Robust threaded brass insert. This part could outlast the bottle. Good build all around.

Prairie Moon took a look at the photos I sent by email and suggested this charger which fits perfectly on my vintage glass/mesh seltzer bottle. That plus the Mr. Fizz cartridges and I'm happily fizzing again. Thanks Prairie Moon!

Everything was exactly like it was supposed to be, Fits my glass/mesh syphon, and works just fine! Was really worried when I bought the soda syphon, because it did not have a cartridge holder. Prairie moon came through with the right one. :o)

As advertised, fit our old glass/mesh syphon and now we're making our own seltzer instead of buying it by the bottle!

good product, good price, great results!

I thought I would find the charger holder for a wire mesh "Sparklets" seltzer bottle I've had for years. Tough search out there. This was the second holder I tried. I guess i'm part of the 5% because it does not fit at all. The plastic throat just pushes over the threads but threads barley begin to bite before it looses it. I gave it a lot of effort including using a knife file to recondition the threads after multiple attempts with some force gave the threads a slight burr. I'd keep trying but despite the cheap price of the part(s) the shipping is double that and I can probably find the whole working unit easier then ordering questionable replacements. Another item for the landfill.

I was given an older mesh siphon as a gift and was so excited to use it. I cleaned it, learned how to use it, then went on a hunt for chargers. I got those and was excited to finally use it, when I realized it was missing the charger holder. I ordered a different one first and was disappointed to find that it didn't fit. I decided that if this one didn't fit, I would have to give up, as I just wasn't finding any other options. It fits great and now I'm enjoying using my classic siphon for delicious seltzer water!

Perfectly fit my Kovocas Seltezer Bottle.

Exactly the perfect fit ! Made our vintage mesh seltzer bottle complete ! So pleased with shipping service and product. thanks Prairie Moon !

I found an old Kovocas siphon that was (of course) missing the charger holder. this one fits it perfectly.

I misplaced the charger holder for my seltzer bottle. Staffs helped me in detail as to which of the two model would fit to mine. Ordered the recommended unit working perfect and am enjoying this well made low cost charger holder now. Thank you very much.

Very helpful on phone and the part was correct.

Charger would not allow the cartridge to be punctured because the depth of the threaded portion was too deep.

...on my pre 2005 mesh wire no name soda siphon. Thank you!

I've been looking for a charger holder for my childhood soda-siphon for years, and finally found one that works! I have the mesh-covered glass siphon that William Sonoma used to put out. This charger holder gave it new life. Absolutely Thrilled with Prairie Moon as always!

I have a Bohemia wire mesh seltzer bottle. The Charger holder fits perfectly. Many thanks!

I have an old ISI white Siphon bottle, that I bought in the 80's. I recently found it in my pantry, so I was excited to use it again. The charge holder was missing, so I ordered and it came pretty fast and fit perfect.But I'm also missing the washer, so now I have to order that too, I hope soon I'll be able to have my good soda water again!

Perfect fit for my vintage glass soda siphon! Now to find the rest of the seals, etc.

Resurrected my vintage siphon from the storage bin.. this charger holder saved a ton of $ buying a new siphon, works perfectly. So do the CO2 cartridges I ordered with it. This is the only place I could find it after lengthy searches on the internet.

After finally getting the charger holder for my classic mesh siphon (purchased for a steal at Goodwill), I came to find out that all the local sources for CO2 cartridges have changed to some new-fangled system. As soon as I get around to ordering those, we'll see if it work. So far, however, it appears to be everything it was cracked up to be!

We found a beautiful antique wire mesh siphon at Salvation Army for $2 sans charger. We ordered the charger for $11 including shipping. and now we have a siphon that makes the best bottled water I have ever tasted. A few tricks: * I add lots of minerals to each batch of filtered water, including: 1/4 tsp. sodium bicarbonate (baking soda), 1/4 tsp. potassium bicarbonate and 1/4 tsp. magnesium sulfate (epsom salts) and 1/4 tsp. calcium carbonate. We bought the minerals at the local home brew store. * Water needs to be VERY COLD. * I need to screw on the charger fairly quickly to seal the valve * Shake the bottle well after charging * Leave the water sitting for at least 6 hours.

We bought an ACC brand, metal mesh covered, Czech made siphon at an antique store, missing the charger holder. This holder needs a spacer of some sort to fit the CO2 cartridges correctly but otherwise works fine. Thanks!

Found an old seltzer bottle at an estate sale but was missing the charge holder. Got on the website and ordered it up. Received it two days later and it works great! Fits perfectly and makes some great soda water!

Bought this for an iSi Siphon I picked up at a thrift store that was made in 1986 and it fit perfectly. Also Prairie Moon has the best price I could find online.

We were thrilled that this worked with our very old soda siphon, for a great price and with VERY fast shipping. I had to create a shim of sorts of cardboard that I glued into the cap because the cartridges weren't pierced initially (even with a new pin), but it was an easy fix and it works great now. What a fortunate find!

Was delighted to find that you had these. It is reasonably priced, arrived quickly, and kept the seltzer maker from adding to the landfill.

WORKED PERFECTLY! Now I can use the old soda siphon from my childhood for adult beverages...

The item fits perfectly and works as it's supposed to. These are increasingly hard to find, the most common missing piece for iSi seltzer bottles (in fact, they appear to be out of stock even here at PrairieMoon). Thank you.