Click on the drawing for a larger view of the parts available for these siphons. Our siphons are made in Hungary by Liss. All parts are the same for both the Tall and Round siphons except for the siphon tube which is different for each model. Please contact us if you have any questions concerning parts for these siphons. The following parts are not available: Availability: Usually ships the next business day. We have a new supply of these parts. We hope to have heads sometime in the future. There is still limited availability of these parts, so we are limiting purchases to 2 pieces of any item per customer. |
|
| 9101 CapOUT OF STOCK, more ???? |
|
|
|
|
| 9103 Pierce Pin SealOUT OF STOCK but we do have a substitute. SUBSTITUTE Working with Liss we have developed the following substitute for the pierce pin (9104) and pierce pin seal (9103) for the glass siphon. You can substitute the pierce pin (9003) and pierce pin seal (9004) from the Liss Stainless Siphon. CAUTION: you must replace both pieces. The pierce pin and pierce pin seal are designed to work together. We have tested the combination pierce pin (9003) and pierce pin seal (9004) from the stainless siphon and they work fine in the glass siphon. Click here for the stainless siphon replacement parts page. |
|
|
| 9104 Pierce PinOUT OF STOCK but we do have a substitute. SUBSTITUTE Working with Liss we have developed the following substitute for the pierce pin (9104) and pierce pin seal (9103) for the glass siphon. You can substitute the pierce pin (9003) and pierce pin seal (9004) from the Liss Stainless Siphon. CAUTION: you must replace both pieces. The pierce pin and pierce pin seal are designed to work together. We have tested the combination pierce pin (9003) and pierce pin seal (9004) from the stainless siphon and they work fine in the glass siphon. Click here for the stainless siphon replacement parts page. |
|
|
|
|
|
|
|
|
| 9116 Tube SealDISCONTINUED Included in part 9117 below. |
|
|
| 9117 Siphon Tube & Seal - Tall & Round SiphonsUse this siphon tube and seal for both the Classic Tall and Classic Round siphons. It is longer than needed for the Round siphon, so you will need to cut it to length with a scissors. When in place, the tube should be about 1/8" off the bottom of the siphon. |
|
|
| 9118 Rubber BaseThe rubber base fits on the bottom of the glass bottle to prevent scratching. Fits Round or Tall siphons. |
|
|
| 9120 Charger HolderHolds gas cartridge and screws onto head for charging siphon. You can substitute iSi charger holder 2925 if we are out of these. It is not a perfect fit but it does work. See the iSi Soda Siphon Parts page. |
|
|
| 9121 Wrench/SpannerUsed to replace parts 9102 through 9107. |
|
|
| 9133-R Replacement Head - Round SiphonOUT OF STOCK, more ???? The replacement head does not come with a charger holder (part 9120). The head is assembled and includes parts 9101 through 9115. This head has the silver extension on the spout. It can be used on the Tall Siphon, but the spout is longer due to the silver extension. |
|
|
| 9133-T Replacement Head - Tall SiphonOUT OF STOCK, more ???? The replacement head does not come with a charger holder (part 9120). The head is assembled and includes parts 9101 through 9115. This head also fits the Round Siphon, but the spout is shorter. |
|
|
| 9140-R Replacement Bottle - Round SiphonOUT OF STOCK, more ???? This is the glass bottle with metal mesh only. No head is included. Part 9118, the rubber base is included. |
|
|
| 9140-T Replacement Bottle - Tall SiphonOUT OF STOCK, more ???? This is the glass bottle with metal mesh only. No head is included. Part 9118, the rubber base is included. |
|
© 2001-2008 The Prairie Moon Company * 311 W Monroe St * Highland * Illinois * 62249-1326 Toll Free 866-331-0767 * Direct 618-651-9939 * Fax 618-654-7768 Email: service@prairiemoon.biz www.prairiemoon.biz |